Page 663 - Hydrover-hydraulic-integrated-circuits-catalogue

COMPONENTS

Flow control, 3-way pressure compensated,

combination type fully adjustable

Common cavity, Size 10
RE 18321-20
Edition: 03.2016
VRFD-10A 04.04.02 - X - 85 - Z Replaces: 09.2009

Technical data
Pressure min. - max. 14 - 350 bar (200 - 5000 psi)
Max. inlet flow 60 l/min. (16 gpm)
Flow range see “Regulated flow range” table
Fluid temperature range -30 to 100 °C (-22 to 212 °F)
Installation torque 41 - 47 Nm (30 - 35 ft-lbs)
Weight 1) 0.26 kg (0.57 lbs)
Cavity CA-10A-3N (see data sheet 18325-70)
Lines bodies and standard Please refer to section “Hydraulic
assemblies integrated circuit” or consult factory
Seal kit 2) Code: RG10A3010520100
Description material no: R901111369
A constant flow rate, regardless of system pressures, is Fluids Mineral-based or synthetics with
established from 1 to 3 while a minimum pressure lubricating properties
2
differential of 14 bar (200 psi) exists between the two at viscosities of 10 to 500 mm /s (cSt)
ports. Input flow supplied to 1 in excess of the regulated Recommended degree of Nominal value max. 10µm (NAS 8) /
ISO 4406 19/17/14
fluid contamination
output at 3 is by-passed to 2. Output flow can be varied Installation No restrictions
from closed to the nominal maximum rating for the valve. Other Technical Data See data sheet 18350-50
Flow from 3 to 1 is limited by the diameter of the selected
control orifice and is not pressure compensated. Flow from 1) Standard version X=04 type
2) Only external seals for 10 valves
2 to 1 is not permitted.
Characteristic curve

Regulated flow

Pressure

Turn

Flow

RE 18321-20/03.2016, Bosch Rexroth Oil Control S.p.A.

Gennaio 2025 edition General catalogue 663